2pcs Car Stereo Dome Tweeters Speakers 600W (2*300W) Music Car Tweeter Car Audio Silk Film Speaker Boxes High-Pitched Modificat Tweeter Loudspeaker

About product:

High-quality Sound: 300W mini dome tweeter speaker delivers clear and powerful audio.

Easy to Install: Comes with a base for easy installation in your car audio system.

Efficient Performance: High efficiency design ensures maximum power output with minimal power consumption.

Wide Compatibility: Compatible with most car audio systems and can be used with a 12V power supply.

Compact Size: Mini dome design allows for easy placement in your car without taking up too much space.

Enhanced Audio Experience: Enhance your car audio experience with this loudspeaker audio auto sound speaker.

Improved Sound Clarity: Clear and crisp sound quality ensures that you can enjoy your music to the fullest.

Specification:

Speaker Types: Tweeters
Impedance: 4 ohms
Voltage: 12V-24V
Sensitivity: 92 dB
Frequency Range (Hz): 2.5kHz~30kHz
Maximum output power: 300W
RMS: 40W
Applicable models: Universal Car, Truck, Bus, etc
Voice Coil Diameter: 1.57 inch (40 mm)
Material: Metal+Magnet+Plastic
Product size: 2 inches

Package:
2*Tweeter
2*Filter Capacitor
2*Speaker Cover Sets
1*Set of Screws

Features:

- Better sound quality and lower energy consumption.

- Instant installation, suitable for any position in the car.

- No magnetic field, tapes and credit cards are safe.

- Equipped with independent filter capacitors, effectively filter out noise, reduce low-frequency sound quality, and make high-frequency stereo full, clear and transparent.

- Widely applicable, universal car audio system.

Installation Instructions:

To protect the vehicle, cover it with a dust cloth.

Pry the door, unscrew the screws inside and around the door panel, and force outward from the bottom of the door panel to remove the door.

Remove the original car horn first fix the gasket on the original car horn.

1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.

2.Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.

3.The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.

4.There will be murmurs and buzzing when the reconfiguration process is not connected correctly.

5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.

6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.

7. Please allow 1-2cm measuring deviation due to manual measurement.